Tech Supp - The Final Frontier!

  • Increase font size
  • Default font size
  • Decrease font size
Home Cisco Cisco Router Cisco Configuration Register

Cisco Configuration Register

E-mail Print PDF

Use the table in Configuration Register Settings and their Meaning to determine the desired configuration register setting (usually 0x2102).

Issue the config-register command to set the configuration register:


Router#configure terminal 
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#config-register 0x2102
Router#show version
Cisco Internetwork Operating System Software 
IOS (tm) 2500 Software (C2500-JS-L), Version 12.1(5), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Wed 25-Oct-00 05:18 by cmong
Image text-base: 0x03071DB0, data-base: 0x00001000
ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1)
Router uptime is 11 minutes
System returned to ROM by reload
System image file is "flash:c2500-js-l_121-5.bin"
cisco 2500 (68030) processor (revision D) with 16384K/2048K bytes of memory.
Processor board ID 03867477, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 Token Ring/IEEE 802.5 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2142 (will be 0x2102 at next reload)
Last Updated on Tuesday, 12 July 2011 20:24