nettechonline

Tech Supp - The Final Frontier!

  • Increase font size
  • Default font size
  • Decrease font size

Samsung Slate 8 - Can't see NAS

Having issues seeing your NAS with your Win8 Slate?

Here is what I did...

 

 

 

To enable access for NAS devices, and RSA Key:

 

From Admin Console:

 

  • sc config lanmanworkstation depend=  bowser/mrxsmb10/nsi

  • sc config mrxsmb20 start= disabled

 

If you are adding to a domain - this step below may be helpful to attach to your Corporate key.

Also, you should run this BEFORE joining your domain.

 

 

  • certutil -setreg chain\minRsaPubKeyBitLength 512

 

 

Reboot

Last Updated on Friday, 21 September 2012 12:00
 

Samsung Slate 8 - Reinstall

I take no credit for this entire article. I did plagerize the entire content but thought this would be possibly something someone else needs. Easy enough to do this and you can find the original article here.

********************************

This guide works 100% for Windows 7 and Windows 8 unlike most of the guides out there. I have seen many sites/blogs that have “Install Vista from USB guide” but either with incomplete steps or not working guide. I have also seen some guides that don’t’ use proper commands in this guide. After spending many hours I have come up with this 100% working guide to install Windows 7 and Windows 8 from USB flash drive.

Bootable USB drive

Last Updated on Sunday, 22 July 2012 16:53 Read more...
 

3750 Switch Priority

12523403750 Operational Notes: Stack Master Settings

The stack master is the single point of stack-wide management. From the stack master, you configure:

- System-level (global) features that apply to all stack members
- Interface-level features for each stack member

All stack members are eligible stack masters. If the stack master becomes unavailable, the remaining stack members participate in electing a new stack master from among themselves. A set of factors determine which switch is elected the stack master. One of the factors is the stack member priority value. The switch with the highest priority value becomes the stack master.

A higher priority value for a stack member increases its likelihood to be elected stack master and to retain its stack member number. The priority value can be 1 to 15. The default priority value is 1.

Last Updated on Friday, 06 July 2012 11:34 Read more...
 
More Articles...


Page 5 of 7

Who's Online

We have 41 guests online

Login Form

RSS Feeds

No Feed URL specified.